Standard Drawings and Samples
Note: Drawings may be used or modified for submission.
- Site plan (X01) — where no survey exists
- Accessory buildings (X02) — guidelines for accessory buildings
- Accessory buildings (X03) — guidelines for accessory buildings
- Accessory buildings (X04) — guidelines for accessory buildings
- Sewage system (X05) — leaching bed clearances and trench details
- Sewage system (X06) — raised leaching bed sections and details
- Sewage system (X07) — filter bed sections and details
- Sump details (X08) — section and details
- Sump details (X08a) — with a storm lateral
- Covered wood deck (X09) — unenclosed plan and details
- Covered wood deck (X10) — unenclosed section and details
- Covered wood deck (X11) — handrail/guard and stair details
- Covered wood deck (X12) (X11) — tables
- Dry hydrant (X14) — rural installation — pond water supply
- Gross floor area (X15) — calculation
- Exterior ramps for houses (X16) — (non-barrier-free) sketches and notes
H03a — barrier-free ramps
H03b — barrier-free ramps - Roof venting (X17) — sketch
W06a — sloping roof detail
W06b — flat roof detail - Pool deck (X18) — pool deck — joists perpendicular to pool wall
- Pool deck (X19) — pool deck — joists parallel to pool wall
- Complete package — pool deck — construction guidelines for accessory buildings
Note: Drawings may be used or modified for submission.
Note: Drawings may be used or modified for submission.
Note: May be used or modified for submission.
Note: For general information only and not to be used for submission.
- A guide to building permits (A01) — building permit Q and A
- A guide to building permits (A02) — drawing requirements for a residential addition
- Sample drawings (A03a) — site plan
- Sample drawings (A03b) — basement plan
- Sample drawings (A03c) — ground floor plan
- Sample drawings (A03d) — elevation
- Sample drawings (A03e) — elevation
- Sample drawings (A03f) — elevation
- Sample drawings (A03g) — cross section
- Sample drawings (A03h) — construction specifications
- Sample drawings (A03i) — schedules
Important
Standard drawings may be submitted as is or with modification. Considering project constraints, a plan review will determine whether or not a permit will be issued. Applicants proposing construction significantly different from a standard drawing must provide their drawings.
Sample drawings are provided for general information only. They illustrate the type of information and level of detail required to ensure an expeditious plan review. Incomplete drawings will result in re-submission and delay permit issuance.
Contact
- Building Division
- Civic Square,
60 East Main St., Welland, ON L3B 3X4 - 905-735-1700 x2251 or x2257
- devserv@welland.ca